Tool and accessories

Hole saw made of bi-metal Coated bi-metal (HS-Co8), flexible, laser-welded connection of alloyed spring steel in the back of the sheet and high-performance quick steel in the toothed cutting area, vario toothing with 4 and 6 teeth per inch, solid back cover for high smoothness and even, fast cut, precise holes for inlet cans, thread, cable and pipe bushings with Ø from 19 to 92 mm

Meißel SDS-Max Specially hardened steel for optimal service life, wear minimization reduced notch sensitivity, increased surface hardness and fatigue resistance Cutting width: 25 mm Cutting shape: Flat chisel Length: 600 mm

Hole saw made of bi-metal Coated bi-metal (HS-Co8), flexible, laser-welded connection of alloyed spring steel in the back of the leaf and high-performance quick steel in the toothed cutting area, vario toothing with 4 and 6 teeth per inch, solid back cover for high smoothness and even, fast cut, precise holes for inlet cans, thread, cable and pipe bushings with Ø from 19 to 92 mm

PUSH-SYSTEM: When printing on the axle, the cord can be pulled out in idle and the crank does not rotate with, quick-release ratio 5:1, hardened hook, also for nailing at edges, material: body made of magnesium die casting, crank and axis made of zinc die casting, In body 100% integrated storage space for the hook, With INOX-Gürtelclip, With 60 g color powder cord: 30 m

Plaster pan material: galvanized, wood. Dimension: 180 mm. Includes fastening hooks

Cable pull stockings for cable pull-in systems Master Suitable for Pkxxe breaking load: 18.8 kn Installation tension: 9.4 kn For cable diameter from/to: 10 - 20 mm

LSA attachment tool for connecting data box & patch panel with LSA clamps. Pressing and cutting in one operation. With drawing hooks and unlocking blade. Pressure point sensor and cutting device can be switched off. With cutting device: Yes

6-piece conical box. In impact- and break-resistant ABS box. 90° 3-cuts. HSS (DMO5) - steel. Hardness at the cutting part = 64±1 HRC / hardness at the shaft min. 45 HRC. CBN-ground cone and deburring scoop. For all common industrial materials. For example: non-ferrous metals, stainless steel sheets, thermoplastic and thermosetting plastics as well as all common steel sheets.

Demantler Automatically adjusts itself to the respective Ø, fastening clip for storage on the workwear, a longitudinal cutter, an internally lying, push-out knife and a stripping device of conductors 0.2 - 4.0 mm2

Wire Knife Stripping Knife made of high-quality wear-resistant polyamide, for sheathing cables 8 - 28 mm Ø, for round and longitudinal section, in addition an internal replacement knife

For quick and precise stripping of all common coaxial cables, RG 58 / RG 59 and PVC round cables 3 x 0.75 mm2, ensures that the inner cable conductors are not damaged. Diameter of/to: 4.8 - 7.5 mm

With scanning system, for all common flexible and solid conductors with Ø of 0.5 to 4 mm2, integrated side cutters, made of glass fiber reinforced polyamide, stripping knives are special hardened stripping area cross section: 0.5 - 4.0 mm2 With wire cutter: Yes

WDE slot screwdriver chrome vanadium molybdenum steel, continuously hardened, with precision tip, integrated suspension hole, tested according to. EN 60900 (IEC 900) with a test voltage of 10,000 volts in the water bath Handle design: 2-component blade length: 75 mm WDE tested: Yes Size: 2.5

WDE slot screwdriver chrome vanadium molybdenum steel, continuously hardened, with precision tip, integrated suspension hole, tested according to. EN 60900 (IEC 900) with a test voltage of 10,000 volts in the water bath Handle design: 2-component blade length: 100 mm WDE tested: Yes Size: 3.5

WDE slot screwdriver chrome vanadium molybdenum steel, continuously hardened, with precision tip, integrated suspension hole, tested according to. EN 60900 (IEC 900) with a test voltage of 10,000 volts in the water bath Handle design: 2-component blade length: 100 mm WDE tested: Yes Size: 4.0