PROTEC.class PHAP Hygrostat AP mechanical rw Wechsler

Hygrostat surface hygrostat mechanical. Serves for monitoring and regulating relative humidity, e.g. in business premises, apartments, winter gardens, bathrooms, swimming pools, computer rooms. A potential-free switching contact is actuated by the action of the relative humidity on a measuring band. The set value is adjusted by means of the setting knob located on the front side. The setting range is bevelable. Number of outputs: 2. Number of control ranges: 1. Output signal2: dehumidification, switching. Humidification: 3 (0.2) A. Dehumidification: 5 (0.2) A. Switching voltage: 24-230 VAC, 50 Hz. Min. switching current: 100 ma. operating voltage: no auxiliary energy required. Average power consumption: 0 W. Adjustment range: 30 - 100. Electrical connection: screw terminals 0.5...2.5 mm2. Material housing: plastic ABS. Sensor: plastic fibers. Hysteresis: approx. 4% r.H. Mechanical range adjustment. Medium: air, not aggressive. Mounting: plaster/wall mounting (4-hole mounting on UP-Dose Ø 55 mm). Surface finish: matt. No potential. Control range: 30 o 100 %. Control function: moistening or dehumidifying switching element: microswitches. Switching contact: switch (changer). Switching power: Clamp 4: 1150 W, Clamp 2: 690 W. Protection type: IP 30. Protection class: II, after appropriate assembly. Safety and Emw: according to DIN EN 60730. Set. Degree of soiling: 2nd storage temperature: -20° to +60°C. Ambient temperature: +10° to +60°C. Permissible humidity: max. 95% r. H, not condensing. Dimensions Housing: 78.3 x 25.5 x 83.4 mm. Weight: approx. 90 g. Color Case: pure white, similar to RAL 9010. Note: Wet cell spacing according to DIN WDE 0100-701! Color: pure white Mounting type: Cleaning With thermostat: No Color: white Protection type (IP): IP30 Digital display: No Adjustment range Relative humidity: 30 - 100%