Sale

Legrand Plexo3, protection class IP65 - IK09, 3-row, 36 modules (12 modules/series), dimensions 622 x 340 x 161 (height x width x depth in mm), self-extinguishing 650 °C, including N and PE clamps, plaster distributor protection class II. Doors transparent, adjustable on both sides. According to EN 62208, for the construction of installation distributors according to EN 61439-3.

Legrand 665114 NILOE LED-DIMMER WEISSBedienungsart: TasteFarbe: weißNennleistung: 3 V·A bis 400,00 V·AProduktlinie: NiloeZusammenstellung: Basiselement mit zentraler AbdeckplatteSeriendimmer: jaLichtwertspeicher: jaVerwendbar mit Taste: jaMontageart: UnterputzBefestigungsart: Befestigung mit SchraubeWerkstoff: KunststoffHalogenfrei: jaAusführung: der Oberfläche glänzendRAL-Nummer (ähnlich): 9003Transparent: neinGeeignet für Schutzart (IP): IP40Nennleistung: 3 V·A bis 400 V·ANennspannung: 240 VFrequenz: 50 Hz bis 60 HzSteuerspannung: 100 V bis 240 VGerätebreite: 80 mmGerätehöhe: 80 mmGerätetiefe: 30 mmProduktlinie: Niloe

Eaton LS switch, 16A, 1p+N, B
Cable switchMeasurement switching capacity according to EN 60898:10kAInteractive neutral conductor: yesProtection type (IP):IP20Construction width:26,3mmSize (according to DIN 43880):1.5Number of poles:1+NTrigger characteristic:BMeasurement voltage:230/400AC48DCVMeasurement current:16AInstallation depth:60mmType of voltage:AC/DCFrequency:50/60Hz

Plug-in for PLS., CLS., PKN., PFIM, PFHM, (with auxiliary switch), any switchgear combinations with or without auxiliary switch possible, only a few components, 2 angle types per rail cross-section for three-phase displacement, common cover profile with end caps for ZV-SS etc. ZV-SS-80AShort-circuit and insulation resistance tested according to IEC/EN 60439-1Measurement current In A: 50Version: flatGalvanized: NoLength mm: 1000Width mm: 8Height mm: 2Flexible: no

Rapid16 30 - 40, black anodized, with grounding pin, mounting type horizontal/vertical, clamping length 50 mm

Schletter 129011-000 plastic end cap for Solo05/Profi05

NETZ-0-NOTSTROM Switch, 4 pole, RE, Ith: 63 A, P: 22 kW(AC-23,400V), wire cross section 25 mm2 FOLLOWING TYPE KA63B.K950.VE2.F437 70024348

FI switch 4pin 6kA 40A 30mA type G/A rated current pre-sureableRated current: 40 ANumber of poles: 4 PSensitivity: 30 mAType of differential protection: A GImpact strength: 4 kVNumber of modules: 4AC voltage: 230/400 VInsulation voltage: 500 VFrequency: 50 HzTorque: 2,8NmConnection type: screw technologyTotal loss power at rated current: 6.5 WDevice life, electrical switching games: 2000Machine life mechanical switching games: 4000Connection cross-section with flexible conductor: 16mm2Connection cross section for rigid conductor: 25mm2Operating temperature: -25 to 40 °CStorage temperature: -55 to 70 °CHeight installed product: 83 mmWide installed product: 70 mmDeep installed product: 70 mm

RAPID 16 THE NEW KLEMMENFAMILIE The Schletter module terminal family Rapid16 offers many advantages, such as e.g. better storage by minimal variants and the grounding pin in each module clamp. Rapid16 is designed for all Schletter module support profiles with 8 mm click groove and for module frame heights of 30 - 50 mm. • Minimum variants for all applications • Integrated grounding pin • Optimum storage and fast installation • General structural approval Z14.4-631 • 10 years warranty The clamping area is divided into 2 sizes. The low module terminals can clamp modules with a frame height of 30-40 mm. The higher ones are suitable for frame heights of 40-50 mm. In all center terminals and in the case of the high end terminals, the claws can be rotated and are therefore suitable for vertical and horizontal (linear) module clamping. Exceptions are the end terminals for low module frames. For geometric reasons, rotation is not possible here. Therefore, there is the low end clamp also in the variant “H”. All clamps are also available in black anodized to match these optically to black module frames.

grounding and lightning protection terminal VA M8, clamping region Rd 8-10 mm, connection single/multi-wire 4 - 50 mm2LxBxH: 37 x 32 x 66 mm.

RAPID 16 THE NEW KLEMMENFAMILIE The Schletter module terminal family Rapid16 offers many advantages, such as e.g. better storage by minimal variants and the grounding pin in each module clamp. Rapid16 is designed for all Schletter module support profiles with 8 mm click groove and for module frame heights of 30 - 50 mm. • Minimum variants for all applications • Integrated grounding pin • Optimum storage and fast installation • General structural approval Z14.4-631 • 10 years warranty The clamping area is divided into 2 sizes. The low module terminals can clamp modules with a frame height of 30-40 mm. The higher ones are suitable for frame heights of 40-50 mm. In all center terminals and in the case of the high end terminals, the claws can be rotated and are therefore suitable for vertical and horizontal (linear) module clamping. Exceptions are the end terminals for low module frames. For geometric reasons, rotation is not possible here. Therefore, there is the low end clamp also in the variant “H”. All clamps are also available in black anodized to match these optically to black module frames.

Roof hook RAPID 2+ PRO, VA quality, welded, leg height 45 mm, web arrangement symmetrical, pre-assembled, compatible with standard and ProLine series with a rotatable multi adapter

50 pieces of COMPACT connection terminal for all conductor types; 3-wire terminal; with actuating levers; max. Ambient temperature 85°C



Total number of clamping points
3



Total number of potentials
1



Colour
transparent



Measurement data according to 1
BY 60664



Pollution (1)
2



Measurement voltage EN (1) [V]
450
V


Measurement surge voltage (1) [kV]
4
KV


Rated current (1) [A]
32
A


Connection technology 1
CAGE CLAMP®



Nominal cross-section 1
4 mm2



one-row, connectable 1
0.2 ... 4 mm2 / 24 ... 12 AWG



multi-wire, connectable 1
0.2 ... 4 mm2 / 24 ... 12 AWG



elegant, connectable 1
0.14 ... 4 mm2 / 24 ... 12 AWG



Stripping length 1
11 mm / 0.43 in



Stripping length of (1) [mm]
11
mm


Stripping length to (1) [mm]
11
mm


Type of wiring
Side wiring



Flammability class according to UL 94
V2



Weight [g]
2527
g


Width
18.7 mm / 0.736 in



Height
8.3 mm / 0.327 in



Depth
18.6 mm / 0.732 in



Safety note 1
in earthed nets