Hager TG600AL smoke alarm standard KRIWAN Q, 3V DC, white
Smoke detector Standard KRIWAN Q, 3V DC, white. Smoke detectors with small size and attractive design language according to DIN EN 14604 with additional certification according to the increased testing requirements of Q certification based on vfdb guidelines 14-01 “Vereinigung zur Förderung des deutschen Brandschutz” (vfdb). Increased test criteria against the penetration of foreign bodies and increased protection against damp heat, oxidation and EMC, as well as better temperature change stress. Serves for early detection signaling fires with smoke development in the interior. Processor-controlled function self-test (all 10 sec.) and PGSA technology with independent algorythmic night-riggering when disturbing influences occur, such as dust, to maintain functional safety. Large function and reset button through the entire upper cover of the detector. Acoustic signal (85 dB at 3 m) and red flashing LED for alarming. Acoustic signal for battery wake, pollution or interference with acoustic signaling and yellow LED. Timely limited deactivation function of the smoke detection for suppression of deception alarms of the detector for approx. 12 minutes with automatic reset function in normal operation. Error messages can be delayed by 8 hours for 7 days by acknowledgement on the reset button. The fault of a contaminated detection unit cannot be reset as long as the fault message continues to exist in the evaluation unit. Ceiling mounting or wall mounting according to DIN14676. The detector has a camping/caravan registration. Disassembly and theft protection can be activated, then unlocking only with screw rotation with max. Size of 7mm possible. When turning into the socket, the detector is automatically activated.