Hager CDS240D fault current switch 2 polig 6kA 40A 30mA Type A QuickConnect
2 polig 6kA 40A 30mA Type A QuickConnect fault current protection switch according to EN 61008-1, DIN EN 61008-2-1 and VDE 0664 Part 10 + 11. QuickConnect terminal according to DIN EN 60898-1, VDE 0641-11 at access up to 63 A, IP2x touch protection according to DIN VDE 0106 part 100, blue test button and fault current display. Simple individual removal from the phase rail composite. With VDE characters. Suitable for subsequent installation of additional equipment. Labeling option directly on the device. Suitable for subsequent installation of additional equipment. Nominal current: 40 A Type of differential protection: A Sensitivity: 30 mA Number of poles: 2 P Impact current strength (impulsive fault currents 8/20μs): 0.25 kA Number of modules: 2 Frequency: 50 Hz
| Rated current | 40 A |
| Type of differential protection | A |
| Sensitivity | 30 mA |
| Number | 2 P |
| Impact current resistance (pulse fault currents 8/20μs) | 0,25 |
| Number of modules | 2 |
| Frequency | 50 Hz |
| Assembly type | DIN rail |
| Connection type | QuickConnect |
| Connection cross section with flexible conductor | 16mm2 |
| Connection cross section for rigid conductor | 25mm2 |
| Torque | 2.8 Nm |
| Type of protection | IP20 |
| Insulation voltage | 500 V |
| Impact strength | 4 kV |
| Additional equipment possible | 1 |
| Operating temperature | -25 to 40 °C |
| Machine life mechanical switching games | 4000 |
| Device life, electrical switching games | 2000 |
| Total loss power at rated current | 9.2 W |
| Degree of contamination according to IEC 60664 / IEC 60947-2 | 2 |
| Height above N.N. | 2000 m |
| Rated current at 30° C | 40 A |
| Storage temperature | -55 to 70 °C |
| Height installed product | 83 mm |
| Wide installed product | 35 mm |
| Deep Installed Product | 70 mm |
