Hager CDA225D fault current switch 2 polig 6kA 25A 30mA Type A
Residual current circuit breaker 2-pole 6kA 25A 30mA type A. Residual current circuit breaker (FI) according to EN 61008-1, DIN EN 61008-2-1, VDE 0664 part 10 + 11, protection against accidental contact IP2x according to DIN VDE 0106 part 100 .Suitable for retrofitting additional equipment (mounting without tools). Wire push-in protection terminals, bottom bi-connect terminals, external blue test button. All products with VDE mark. Labeling option directly on the device.
Rated current | 25A |
Type of differential protection | A |
Sensitivity | 30mA |
Number of Poles | 2P |
Surge current resistance (pulse fault currents 8/20µs) | 0.25kA |
Number of modules | 2 |
Frequency | 50Hz |
Mounting type | DIN rail |
Type of connection | screw technology |
Connection cross section with flexible conductor | 16mm² |
Connection cross section with rigid conductor | 25mm² |
torque | 2.8Nm |
degree of protection | IP20 |
Insulation voltage | 500V |
Surge withstand voltage | 4kV |
Additional equipment possible | 1 |
Operating temperature | -25 to 40 °C |
Device lifetime mechanical switching cycles | 4000 |
Device service life, electrical switching cycles | 2000 |
Total power loss under rated current | 3.4W |
Degree of contamination according to IEC 60664 / IEC 60947-2 | 2 |
Height above sea level | 2000m |
Rated current at 20° C | 25A |
Rated current at 30° C | 25A |
Rated current at 35° C | 25A |
Rated current at 40° C | 25A |
Rated current at 45° C | 25A |
Rated current at 50°C | 25A |
Rated current at 55° C | 25A |
Rated current at 60°C | 25A |
Rated current at 65°C | 25A |
Rated current at 70°C | 21A |
Storage temperature | -55 to 70 °C |
Height installed product | 83mm |
Wide installed product | 35mm |
Deep Installed Product | 70mm |
SSL-encrypted data transmission
10,000 items available within 72 hours
Fast response