Eltako FT4F-rw radio sensor puretwo 30000702
80 x 80 mm outside, frame internal dimensions 63 x 63 mm, 15 mm high. Creates the energy for radio telegrams even at key pressure, therefore without connection line and no stand-by loss Number of channels: 4 Color: pure white Signal transmission: Mounting type: Material: Material quality: Range: 30 m Window transmitter: No Suitable for display element: No Hand transmitter: No Wall transmitter: Yes Remote control: No Halogen-free: Yes Surface design: matt Suitable for switches: Jammy size 80. Creates the energy for radio telegrams even at key pressure, therefore without connection line and no stand-by loss. Included are the frame R1F, a surface rocker WF, a surface double rocker DWF (all the same color), a fastening frame BRF, the holding plate HP, the radio module and an adhesive film. Radio buttons with a rocker can send two evaluateable signals: press the rocker at the top and press the rocker at the bottom. Radio buttons with double rocker can send four evaluateable signals: press two rockers up and down. The holding plate can be screwed onto a flat surface or glued to the wall, to glass or to furniture by means of the attached adhesive film. The sleeves present in the can are used for screw fastening via a 55mm switch box. From work, the double rocker is locked onto the radio module. If these are to be exchanged for the large rocker, then pull the rocker halves forward and do not bend towards the center. Then the large rocker snaps on in such a way that its markings 0 and I correspond to the radio module on the rear side. When glued, first attach the set holding plate with frame and fastening frame - with the latches on top and bottom. Then the set radio module with rocker - marking 0 on the back always up - snap in. Before screwing the frame with fastening
SSL-encrypted data transmission
10,000 items available within 72 hours
Fast response