List of products by brand Protec

NH00 Locking inserts with metal handle tabs NH00 Low-voltage protection, according to DIN WDE 0636 part 2, nominal voltage: 500W AC / 220W DC, width: up to 100A 20 mm / from 125A 30 mm, NH000 to 100A / NH00 from 125A, voltage-carrying grip tab, operating class (gL)-gG full-range safety inserts (for cable and cable protection) for general applications

Conductor terminals for mounting on DIN rails, e.g. for small installation distributors and counters acc. WDE 0603. 35/25 mm2. 1-pole. Classy. Mounting on 35 mm support rail according to. EN 60715 / EN 50022. Installation small distributor and counter positions AC 400W. Main line branch terminals WDE 0603-2, connection material for low voltage circuits for household and similar purposes WDE 0613, Part 1 / EN 60998-1. Color coding corresponding to valid vein colors. Mounting horizontally or vertically. Insulation voltage: 1000 W AC / DC for: Overvoltage category III (Uimp = 8 kw, fixed installation,) Level of contamination 2 (e.g. distribution installation). WDE certified (WDE 0613, Part 1 / EN 60998-1): Test current 125 A. Suitable for Cu and Al conductors. Clamp: brass (galvanized). Clamp screws: steel, galvanized. Insulation housing: plastic (polyamide,) impact-resistant, halogen-free. Line connection: - Main line: 10 - 35 mm2 rigid/multi-wire, 3.5 Nm - branch line: 1.5 - 25 mm2 rigid/multi-wire, 2.5 Nm - stripping length: 25 mm. Inputs max. 35 mm2: 2. Outputs max. 25 mm2: 6. Bushing clamp with 2 screws per clamping point, screws with combination slot Pozidriv Z2. Corners rounded. miter protection: IP20, fingerproof

Conductor terminals for mounting on DIN rails, e.g. for small installation distributors and counters acc. WDE 0603. 35/25 mm2. 1-pole. Classy. Mounting on 35 mm support rail according to. EN 60715 / EN 50022. Installation small distributor and counter positions AC 400W. Main line branch terminals WDE 0603-2, connection material for low voltage circuits for household and similar purposes WDE 0613, Part 1 / EN 60998-1. Color coding corresponding to valid vein colors. Mounting horizontally or vertically. Insulation voltage: 1000 W AC / DC for: Overvoltage category III (Uimp = 8 kw, fixed installation,) Level of contamination 2 (e.g. distribution installation). WDE certified (WDE 0613, Part 1 / EN 60998-1): Test current 125 A. Suitable for Cu and Al conductors. Clamp: brass (galvanized). Clamp screws: steel, galvanized. Insulation housing: plastic (polyamide,) impact-resistant, halogen-free. Line connection: - Main line: 10 - 35 mm2 rigid/multi-wire, 3.5 Nm - branch line: 1.5 - 25 mm2 rigid/multi-wire, 2.5 Nm - stripping length: 25 mm. Inputs max. 35 mm2: 2. Outputs max. 25 mm2: 6. Bushing clamp with 2 screws per clamping point, screws with combination slot Pozidriv Z2. Corners rounded. miter protection: IP20, fingerproof

Suitable for cable screw connections PKWM thread size metric/PG: 20 thread type: metric material quality: polyamide halogen-free: Yes fiberglass reinforced: Yes incline: 1.5 RAL: 7035 Key width: 27 mm

Zero,- protective conductor and diverter terminal conductor terminals for mounting on DIN support rails, e.g. for installation small distributors and counters acc. WDE 0603. Clamping points: 14 plug connections + 1 screw connection possible to mount behind the clamp cover. Corners rounded. Cable connection: plug connection 12 x 1 ... 2.5 mm2 rigid/multi-reversal or. 0.75 ... 1.5 mm2 with wire end sleeve 2 x 1 ... 4 mm2 rigid/several, plug connection 1 ... 2.5 mm2 with wire end sleeve screw connection (feed line): 1 x 1.5 ... 25 mm2 rigid/several. 1 ... 16 mm2 with wire end sleeve. standards / regulations: connecting material - electrical copper conductors; Safety requirements for screw terminals and screwless clamping points. WDE 0609, Part 1 / EM 60999-1 Connecting material for low voltage circuits for household and similar purposes WDE EN 60998-1; WDE 0613-1. Mounting: On DIN support rail according to EN 50022 / EN 60715 rated current: 80 A (feed line). Insulation voltages: 500 V (degree of contamination 2, overvoltage category III). Contact protection: BGW A2 / WBG4, fingerproof

With lid, for clamps up to 4 mm2, material thermoplastic, protection: IP20, flame resistance box 650°C according to WDE 0606 Part 1 / DIN IEC 695 Part 2-1 Length: 100 mm Width: 100 mm Depth: 48 mm Halogen-free: Yes

2-part insulating material socket, approx. 120 mm connection line 2 x 0.75 mm2, suspension, with screw or plug clamp available

Type of cable: 25 mm

D0 screw caps made of plastic With test hole, AC 400 W, DC 250 W Version: 63 A Material: Plastic For size: D02

Main line branch terminals 25/16 mm2, 1-pole. Classy. Mounting on 35 mm support rail according to. EN 50022 / EN 60715. e.g. for installation small distributors and counter positions according to. WDE 0603. Installation small distributor and counter positions AC 400W. Main line branch terminals WDE 0603-2, connection material for low voltage circuits for household and similar purposes WDE 0613, Part 1 / EN 60998-1. Color coding corresponding to valid vein colors. Voltage: 1000 W. WDE certified. Suitable for Cu and Al conductors. Inputs max. 25 mm2: 2. Outputs max. 16 mm2: 4. Clamp body: brass, (galvanized). Clamp screws: steel, galvanized. Insulation housing: plastic, (polyamide) impact-resistant, halogen-free. Main line 1.5 - 25 mm2 rigid/several, 2.5 Nm. branch line: 1.5 - 16 mm2 rigid/multiplier, 2 Nm. Stripping length 16 mm. Bushing clamp with 2 screws per clamping point screws with combination slot Pozidriv Z2. IP 20, fingerproof. Corners rounded. Number of poles: 1 Colour: brown

Type of cable: 40 mm

Type of protection according to EN 50262, type of protection according to EN 60529, cable gland including hexagonal counter nut + sealing ring, with integrated sealing lip, silicone-free, application temperature range: -40°C to +100°C thread length: - PKGM12, PKGM16 = 9 mm - PKGM20, PKIP25 = 10 mm - PKGM32 = 12 mm