List of products by brand Eltako

Current surge switches for mounting on support rails DIN-EN 60715 TH35 rated switching power 16 A / 250 W AC or. 10 A / 400 W AC with manual actuation and switching position display mechanical storage of the switching position Number of shutters: 1 Number of openers: 1 Width in division units: 1 Rated switching current: 16 A Control voltage 1: 24 - W Control voltage type 1: AC Mounting depth: 55 mm Installation type: DIN rail Frequency of control voltage 1: 50 - 50 Hz Voltage type of supply voltage: AC Supply voltage range: 250 - 250 W Max. Bulb load: 2300 W Max. Lamp load: 2300 VA Max. Fluorescent lamp load (Duo circuit): 2300 VA Max. Fluorescent lamp load (parallel compensated): 500 VA Max. Switching current (cos phi = 0.6): 10 A manual operation possible: Yes Electromechanical power surge switch with manual actuation and switching position display. Switch-on time 100%. 5-6W. Contact distance 3mm. Distance control connections/contact > 6mm. Suitable for connection to an SELV network.

Switchgear, Series 12 For DIN EN 50022, rated switching power 16 A/250 W AC or 10 A/400 W AC. Power surge series switches with manual actuation and switch position display. Switch-on time 100%. 5-6W. Contact distance 3mm. Distance control connections/contact > 6mm. Suitable for connection to an SELV network. Width in division units: 1 Number of changers: 0 Number of switches: 2 Number of openers: 1 Rated switching current: 16 A Control voltage 1: 12 - 12 W Control voltage type 1: AC Installation depth: 55 mm Function: other assembly type: DIN rail Frequency of control voltage 1: 50 - 50 Hz Voltage type of supply voltage: AC Supply voltage range: 250 - 250 W Max. Bulb load: 2300 W Max. Lamp load: 2300 VA Max. Fluorescent lamp load (Duo circuit): 2300 VA Max. Fluorescent lamp load (parallel compensated): 500 VA Max. Switching current (cos phi = 0.6): 10 A manual operation possible: Yes

Switchgear, Series 12 For DIN EN 50022, rated switching power 16 A/250 W AC or 10 A/400 W AC. Serial switch Width in division units: 1 Number of changers: 0 Number of switches: 2 Number of openers: 1 Rated switching current: 16 A Control voltage 1: 230 - 230 W Control voltage type 1: AC Installation depth: 55 mm Function: other assembly type: DIN rail Frequency of control voltage 1: 50 - 50 Hz Voltage type of supply voltage: AC Supply voltage range: 250 - 250 W Max. Bulb load: 2300 W Max. Lamp load: 2300 VA Max. Fluorescent lamp load (Duo circuit): 2300 VA Max. Fluorescent lamp load (parallel compensated): 500 VA Max. Switching current (cos phi = 0.6): 10 A manual operation possible: Yes Current surge series switches with manual actuation and switching position display. Switch-on time 100%. 5-6W. Contact distance 3mm. Distance control terminals/contact > 6mm.

Radio antenna with magnetic foot small attached radio antenna of the radio antenna module FAM12, radio antenna switch actuator FAA12 or radio antenna switch actuator FAB12 can be replaced by a larger antenna for the introduction of the radio signals in metal switch cabinets, is mounted externally with a magnetic foot and the 250 cm long cable is guided inward to the FAM12, FAA12 or FAB12 only. The small adjacent radio antenna of the radio antenna modules and some radio transmitter modules can be exchanged for receiving or transmitting the radio signals in or out of metal switch cabinets for these larger 868Mhz-HF antennas. It is mounted externally with a magnetic foot and the 250cm long cable is guided inward. The best performance is achieved if it adheres to a metal surface with the magnetic foot. The transmission and reception area is almost spherical around this antenna. Height of the antenna only 10cm. With SMA screw connection. Frequency range: 868 - 868 Mhz

Power surge switches for can mounting and AP mounting with manual actuation and switching position indicator Rated switching power 10 A/250 W AC or 6 A/400 VAC Dimensions: 26 x 50 x 32 mm Width in division units: 2,3 Number of changers: 0 Number of switches: 1 Number of openers: 0 Rated switching current: 10 A control voltage 1: 8 - 8 W. Bulb load: 2300 W Max. Lamp load: 2300 VA Max. Fluorescent lamp load (Duo circuit): 2300 VA Max. Fluorescent lamp load (parallel compensated): 500 VA Max. Switching current (cos phi = 0.6): 10 A manual operation possible: Yes Electromechanical power surge switch with manual actuation and switching position display. Switch-on time 100%. 4-5W. Contact distance 2mm.

Switching relays for can installation and AP mounting with manual actuation and switching position indicator Rated switching power 10 A/250 W AC or 6 A/400 VAC Electromechanical switching relay 8V. 1 closer 10A/250V AC. For installation and AP mounting with manual actuation and switching position display. 50mm long, 26mm wide, 32mm deep. Switch-on time 100%. 4-5W. Contact distance 2mm. Test voltage Contact/contact 2000W and test voltage control connections/contact 4000W. Voltage type for actuation: AC Number of contacts as closer: 1 Rated control voltage Us at AC 50 Hz: 8 - W

Installation protector series installation device with manual actuation and switching position display. AC-types with rectifier, therefore free of bruise and reduced power loss. Rated switching power 25 A/250 W AC, voltage type of operating voltage: AC Number of switches: 2 Number of openers: 0 Protection type (IP): IP20 Number of division units: 1 Max. Bulb load: 2300 W Rated operating current: 25 A Rated operating voltage: 250 - 250 W Max. Fluorescent lamp load (parallel compensated): 1000 VA Max. Fluorescent lamp load (Duo circuit): 3600 VA Max. Fluorescent lamp load: 3600 VA Additional devices possible: Yes Voltage type of actuating voltage: AC Mounting depth: 55 mm Installation contactor with manual actuation and switching position display. Switch-on time 100%. Control power requirement 1.9W. Contact distance 3mm. Test voltage Contact/contact 2000W and test voltage control connections/contact 4000W.

Installation protector series installation device with manual actuation and switching position display. AC-types with rectifier, therefore free of bruise and reduced power loss. Rated switching power 25 A/250 W AC, manual operation and switching position indicator. Switch-on time 100%. Control power requirement 1.9W. Contact distance 3mm. Test voltage Contact/contact 2000W and test voltage control connections/contact 4000W. Voltage type of operating voltage: AC Number of locks: 1 Number of openers: 1 Protection type (IP): IP20 Number of division units: 1 Max. Bulb load: 2300 W Rated operating current: 25 A Rated operating voltage: 250 - 250 W Max. Fluorescent lamp load (parallel compensated): 1000 VA Max. Fluorescent lamp load (Duo circuit): 3600 VA Max. Fluorescent lamp load: 3600 VA Additional devices possible: Yes Voltage type of actuating voltage: AC Mounting depth: 55 mm

Bus couplers for wire connections of the bus and power supply bridges, for mounting on support rail DIN-EN 60715 TH35, cross wiring bus and power supply with plug-in bridge, can connect both different bus parts and feed in power supplies, bus parts on different support rails or in other distributors or switch cabinets are each connected with an FBA14 and a 4-wire shielded bus line, e.g. a telephone line. Bus and power supply with plug-in bridge. The bus coupler FBA14 can connect both different bus parts and feed power supplies. Bus parts on different support rails or in other distributors or control cabinets are each connected to an FBA14 and a 4-wire shielded bus line, for example a telephone line. The total length of all connecting lines should not exceed 100m and the only 9mm wide 2nd final resistance to the FAM14 or FTS14KS must be plugged onto the last actuator. The position of the bus coupler in a series of devices of the series 14 is arbitrary.

Bus bridge connectors for wire connections of bus and power supply bridges, series 14, 45 cm long, 4-wire strand with soldered plug-in bridges on both sides Bus system EIB/KNX: No Bus system Funkbus: Yes Bus system Powernet: No Mounting type: other number of connections: 2 Bus system LON: No Other bus systems: without bus bridge connectors for wire connections of bus bridges. 4-wire cord with soldered plugs on both sides. The BBW14 Bus Bridge Connector can connect bus parts on various support rails. In order to connect series assembly units of the series 14 with transverse wiring bus and power supply with plug-in bridges on various support rails in a switch cabinet or distributor in a space-saving manner, bus bridge connectors are plugged onto at the end of a series of devices and at the beginning of the next series of devices.

Switching relays for can installation and AP mounting position indicator, control power requirement only 5 watts. Rated switching power 10 A/250 W AC or 6 A/400 VAC Number of contacts as changer: 2 Rated control voltage Us at AC 50 Hz: 230 - W Electromechanical switching relay with manual actuation and switching position display. 50mm long, 42mm wide, 32mm deep. Switch-on time 100%. 5-5.5W. Contact distance 2mm. Test voltage Contact/contact 2000W and test voltage control connections/contact 4000W.

Current surge switches for can installation and AP mounting position indicator, control power only 5 watts. Rated power 10 A/250 W AC or 6 A/400 VAC Electromechanical power surge switch with manual actuation and switching position display. 50mm long, 42mm wide, 32mm deep. Switch-on time 100%. 5-5.5W. Contact distance 2mm. Number of changers: 2 Rated switching current: 10 A Control voltage 1: 230 - W Installation depth: 32 mm Assembly type: Powered voltage type of supply voltage: AC Supply voltage range: 250 - 250 W Max. Bulb load: 2300 W Max. Lamp load: 2300 VA Max. Fluorescent lamp load (Duo circuit): 2300 VA Max. Fluorescent lamp load (parallel compensated): 500 VA Max. Switching current (cos phi = 0.6): 10 A manual operation possible: Yes