List of products by brand Berker

Power supply with frame Berker S.1 polar white, glossyPower supply with frame Berker S.1 polar white, glossy 100 - 240 V~, 50 - 60 Hz output voltage 24 V= output current 250 mA input current max. 180 mA operating temperature -5 - +40 °C Approval according to EN 60335, EN 60950 For installation in commercial built-in cans according to DIN 49073-1 IP40 (contact protection from 1mm, no water protection). For the voltage supply of the emergency call system components with 24 V=. - central piece connector - suitable for multiple combinations - with screw terminals

socket SCHUKO with control LED and labeling field Berker S.1 / B.3 / B.7 polarsocket SCHUKO with control LED and labeling field Berker S.1/B.3/B.7 polar white, matt increased contact protection VDE 0620-1 16 A, 250 V~ power consumption approx. 0.275 W Connection clamps according to IEC 60884-1 Connection clamps according to VDE 0620-1 Designed according to DIN 49440 Labeling field height for P-touch band 6 mm. - with screw-lift clamps

Connection terminals: according to VDE 0620-1Type of construction: according to DIN 49440Rated voltage: 250 V ACRated current: 16 ALabeling fieldincreased contact protectionwith screw-release clampsLabeling field height for P-touch band 6 mm.polar white glossy

socket SCHUKO with FI protection switch Berker S.1/B.3/B.7 polar white, mattsocket SCHUKO with FI protection switch Berker S.1/B.3/B.7 polar white, matt - with increased contact protection VDE 0620-1 16 A, 250 V~, 50/60 Hz Rated fault current 30 mA Trigger time = 30 ms Short-circuit strength 3 kA (for pre-locking 20 AgL) Impact resistance 250 A (8/20) μs Suitable for use according to DIN VDE 0100-410 Tested according to VDE 06648. - for the protection of plugged and downstream consumers - type A for alternating and pulsating direct currents - with plug-in terminals

Rated voltage: 250 V ACFrequency: 50/60 HzRated current: 16 AMeasurement error current: 30 mATrigger time: ≤ 30 msShort-circuit strength (for pre-securing 20 AgL): 3 kAImpact current strength: 250 A (8/20) μsType of construction: according to DIN 49440Connection terminals: according to VDE 0620-1Tested according to VDE 0664 (EN 61008)increased contact protectionto protect inserted and downstream consumersType A for alternating and pulsating direct currentswith connectorsBY S.1/B.3/B.7polar white glossyFor use in old plants with stock protection without additional protection requirements.Wired sockets are also protected.

Central piece with dust protection slides and labeling field Berker B.3 / B.7 anthrCentral piece with dust protection slides and labeling field Berker B.3/B.7 anthracite, matt - for support plates with colored receptacles 2x Designed for support plate 2x labeling field height for P-touch band 6 mm.

Rocket with red lens and imprint Heating Emergency switch" Berker S.1/B.3/B.7 red,"Rocket with red lens and imprint Heating Emergency switch Berker S.1/B.3/B.7 red, matt - for windshield switch off/exchange, cross - for windshield - for control circuit - for pushbutton-BA 1x and group push button-BA 1x or glass pane-protected heater emergency switches from the Arsys, wg Up IP44, Aquatec IP44 programs. Not suitable for heating systems > 50 kW.

socket Berker S.1/B.3/B.7 red,mattsocket Berker S.1/B.3/B.7 red, matt 16 A, 250 V~ connection terminals according to VDE 0620-1 connection terminals according to IEC 60884-1 design according to DIN 49440 , with plug-in terminals.

socket SCHUKO with imprint Berker S.1/B.3/B.7 red, mattsocket SCHUKO with print EDV" Berker S.1/B.3/B.7 red, matt 16 A, 250 V~ connection terminals according to VDE 0620-1 connection terminals according to IEC 60884-1 design according to DIN 49440 - with plug-in terminals

socket SCHUKO with labeling field Berker S.1/B.3/B.7 red, mattsocket SCHUKO with labeling field Berker S.1/B.3/B.7 red, matt 16 A, 250 V~ connection terminals according to VDE 0620-1 connection terminals according to IEC 60884-1 design according to DIN 49440 labeling field height for P-touch band 6 mm. - with plug-in terminals The insert is marked in color.

Central plate for 3 MINI-COM modules Central plate system anthracite matt/samtMini Combing Modules for Mini Combing Modules! Use only with intermediate ring for central plate of the program.

socket Berker S.1/B.3/B.7 red,mattsocket Berker S.1/B.3/B.7 red, matt 16 A, 250 V~ connection terminals according to VDE 0620-1 connection terminals according to IEC 60884-1 design DIN 49440 - with screw-release clamps The insert is marked in color.