List of products by brand Dehn

Overvoltage arresters DEHNrail M 2P 2552-pole, modular, plug-in overvoltage arrester to protect end devices of industrial electronicswidth 1TE, Defective indicatorConductor type 3 according to EN 61643-11Maximum continuous voltage: 255 V ac/dcTotal leakage current: 5 kAProtection level L/N: Prevention: 25 A gG or B 25 AEnergetic coordination according to DIN EN 62305-4 Head of the Red/Line family

Multi-pole surge arrester DEHNguard M, type 2 according to EN 61643-11, consisting of base part and plugged protective modules. High device safety due to thermal dynamic control. To protect low-voltage consumer systems from overvoltages. For use in the flash protection zone concept at the interfaces 0B– 1 and higher.

Multi-pole surge arrester DEHNguard M YPV SCI, type 2 according to EN 50539-11 with three-stage DC switching device consisting of base part and plugged protective modules. Combined cutting and short-circuiting device with safe electrical separation in the protective module. To protect low-voltage consumer systems from overvoltages. For use according to IEC 60364-7-712:2002-05 (building photovoltaic supply systems).Overvoltage arrester DEHNguard M YPV SCI 1000Multi-pole, modular, pluggable photovoltaic conductor up to 1000 V DCwith 3-stage DC switch, width 3TEDefective indicatorType 2 according to EN 50539-11 Suitable for IEC 60364-712Safe electrical separation in the protection moduleMaximum PV voltage: Total leakage current: 40 kAProtection level: Short-circuit strength Iscpv: 10 kA

Multi-pole surge arrester SPD VT2, type 2 according to EN 61643-11, consisting of base part and plugged protective modules. High device safety due to thermal dynamic control. To protect low-voltage consumer systems from overvoltages. For use in the flash protection zone concept at the interfaces 0B – 1 and higher.

Overvoltage arrester DEHNguard M TNS 2754-pole, modular, pluggable overvoltage arrester for 230/400 V TN-S systems, width 4TE Conductor type 2 according to EN 61643-11Defective indicatorMaximum continuous voltage: 275 V ac Protection level: Rated output current: 20 kAShort-circuit strength: 50 kAeffEnergetic coordination according to DIN EN 62305-4Head of the Red/Line family

Overvoltage arrester DEHNguard M TNS 275 FM 4-pole modular, plug-in overvoltage arrester for 230/400 V TN-S systems, width 4TE with telecommunication contact arrester type 2 according to EN 61643-11 defect indicator Maximum continuous voltage: 275 V ac Protection level:

Combi depot DEHNshield TNC 2553-pin combination conductor for 230/400 V- TN C systems Conductor type 1 + type 2 according to EN 61643-11, width 4TEApplication-optimized use in compact electrical installationsspark gap technology with downstream current limitation Defective indicator Maximum continuous voltage: 255 V AC Protection level: Flash current (10/350): 37.5 kA Energetic coordination according to DIN EN 62305-4 Conductor of the Red/Line family, as well as directly to the terminal

Überspannungs-Ableiter DEHNguard M TNC 2753-poliger, modularer, steckbarer Überspannungs-Ableiter für TN-C-Systeme, Breite 3TE Ableiter Typ 2 nach EN 61643-11DefektanzeigeHöchste Dauerspannung: 275 V acSchutzpegel: <= 1,5 kVNennableitstoßstrom: 20 kAKurzschlußfestigkeit: 50 kAeffEnergetische Koordination nach DIN EN 62305-4 Ableiter der Red/Line-Familie Fabrikat: DEHN + SÖHNE Typ: DG M TNC 275 Art.-Nr.: 952300

Overvoltage arrester DEHNguard M TT 2754-pole, modular, pluggable overvoltage arrester for 230/400 V TT and TN-S systems, width 4TEConductor type 2 according to EN 61643-11Defective indicatorMaximum continuous voltage: 275 V acProtection level: Rated output current: 20 kAShort-circuit strength: 50 kAeffEnergetic coordination according to DIN EN 62305-4 Head of the Red/Line family Factory: DEHN + SÖHNE Type: DG M TT 275 Art. No: 952310

for universal use as cross, T and parallel clamps, two-piece, thread in the bottom part with hexagonal screw M10 DIN 933

Multi-pole, application-optimized combination arrester DEHNshield, type 1 + type 2 according to EN 61643-11 based on spark gaps. For the protection of residential buildings and for use in special applications. Enables terminal protection. For protection against overvoltages, even with direct flashes. Useable according to the flash protection zone concept at interfaces 0A– 2.

Single-pole surge arrester DEHNguard S, type 2 according to EN 61643-11, consisting of base part and plugged protective module. High device safety due to thermal dynamic control. To protect low-voltage consumer systems from overvoltages. For use in the flash protection zone concept at the interfaces 0B– 1 and higher.Overvoltage arrester DEHNguard S 2751-pole, modular, plug-in surge arresterwidth 1TE, Defective indicatorConductor type 2 according to EN 61643-11Maximum continuous voltage: 275 V ac/350 V dcProtection level: Rated output current: 20 kAShort-circuit strength: 50 kAeffEnergetic coordination according to DIN EN 62305-4 Head of the Red/Line family

Stationary ladder DEHNshield TT 2554-pole combination conductor for 230/400 V- TT and TN (C) -S systems,Width 4TEConductor type 1 + type 2 according to EN 61643-11Application-optimized use in compact electrical installationsspark gap technology with downstream current limitation Defective indicator Maximum continuous voltage: 255 V AC Protection level: Flash current (10/350): 50 kA Energetic coordination according to DIN EN 62305-4 Conductor of the Red/Line family, as well as directly to the terminal