Finder

Multifunction time relay for DIN rail, 22.5 mm wide, 1 changer for 16 A / 250 W AC, contact material Agni, functions: response delay, turn-on wiper, pulse relay (blinker) symmetrical pulse start, fallback delay, response/relapse delay, turn-on wiper with B1, watchdog function (WD) - turn off when the start contact remains closed for longer than the set time

Multifunction time relays for DIN rails, 22.5 mm wide, 2 changers for 12 A/250 W AC, contact material Agni, 1 changer selectable as emergency contact, functions: response delay, turn-on wiper, pulse relay (blinker) symmetrical start-up, fall-back delay, response/relapse delay, turn-on switch with B1, watchdog function (WD). A changer can be switched as an instant contact. 8 time ranges: 0.05 s - 10 days, supply voltage: 24-240 W AC/DC (50/60 Hz)

SSR relays in 22.5 mm housing, connections according to relay type, input voltage 40 to 280 W AC, 1 closer for 30 A, switch-on current up to 520 A for 10 ms, switching load voltage range 48 to 480 W AC, zero-pass switches, lamp loads: incandescent and halogen lamps 6000 W, energy saving lamps 4000 W, LED (230 W AC) 4000 W, NV halogen lamps.

Electronic active current meter for 1-phase alternating current with multifunctional LCD display, maximum current 32 A, accuracy class 1/B (5 A,) series mounting device for 35 mm DIN rail EN 60715 TH35, width 17.5 mm, nominal voltage 230 W AC, SO interface according to DIN 43864 (1000 pulses per kwh,) plombable, MID compliant. Connection cross-section main circuit: 1-6 mm in diameter, more diagonal 0.75-4 mm2.

Electronic active current meter for 3-phase three-phase three-phase current with multi-functional LCD display, maximum current 65 A, 2-rate counter (day and night) Accuracy class 1/B, for 35 mm DIN rail 60715 TH35, width 70 mm, nominal voltage 3 X 230 W AC, SO interface according to DIN 43864 (1000 pulses per kwh,) plombable, MID compliant. Connecting cross-section main circuit: 1.5-16 mm, multi-diameter 1.5-16 mm2.

Electronic active current meter for 3-phase three-phase three-phase current, maximum current 65 A, accuracy class 1/B, series installation device for 35 mm DIN rail EN 60715 TH35, construction width 70 mm, nominal voltage 3 x 230 W AC, SO interface according to DIN 43864 (100 pulses per kwh,) plombable, MID compliant. Connecting cross-section main circuit: 1.5-16 mm, multi-diameter 1.5-16 mm2.

Electronic active current meter for 3-phase three-phase three-phase current, maximum current 65 A, 2-counter (day and night,) Accuracy class 1/B, for 35 mm DIN rail EN 60715 TH35, width 70 mm, nominal voltage 3 X 230 W AC, SO interface according to DIN 43864 (100 pulses per kwh,) plombable, MID compliant. Connecting cross-section main circuit: 1.5-16 mm, multi-diameter 1.5-16 mm2.

Thermostat for installation in the control cabinet, series installation device for DIN rail, 17.5 mm wide, with variable switching threshold of 0 to 60 degrees. 1 closer for 10 A, maximum switch-on current 20 A for 10 seconds. Contact material Agni, bimetal jump contact, blue adjustment button.

Staircase Lighting Machine (Function Switching wiper,) retriggerable, with zero passage, for DIN rail, 17.5 mm wide, 1 closer for 16 A / 250 W AC, contact material Agsno2, time range 0.5 to 20 min. suitable for N switching, the foot point of the probe and the L connection of the load are at point 3. Lamp loads: incandescent and halogen lamps 3000 W, energy saving lamps 600 W, LED (230 W AC) 600 W, NV halogen lamps or LED with EEC 600 W, NV halogen lamps or LED with KWG 1500 W, fluorescent lamps with EEC 1500 W, fluorescent lamps with KWG 1000 W, connection voltage: 230 W AC All connections on the lower side. For retrofitting existing systems and as a replacement. The probes must be suitable for switching the lamp load.

Dimmer for DIN rail, with memory function. 2 modes of operation for 3 types of lamps can be selected via selector switches, the minimum brightness is adjustable. Output circuit: 300-500 W. Switch-on period(ED): 100 %, minimum switching power: 3 W. Lamp loads: incandescent and halogen lamps 500 W, NV halogen lamps via ring core transformer 500 W, NV halogen lamps via iron core transformer 500 W, NV halogen lamps via EEC 500 W, dimmable energy saving lamps 100 W, dimmable LED lamps internal temperature.

Electrical thermostat for installation in the control cabinet, adjustable functions and switching thresholds, switch-on temperature range: from +10 to +60°C, switch-on humidity range: 50 to 90% rh, 1 closer 10 A, supply voltage: from 110 to 240 W AC/DC, LED status display, 17.5 mm wide, for support rail 35 mm (EN 60715)

Electronic control clock with LCD display for series installation, 1 changer for 16 A/250 V AC (AC1), joystick programming or programming via an NFC-enabled smartphone with the Finder Toolbox - Android App. After installation of Finder App, an existing program can be read or reprogrammed with maximum flexibility. To transfer the data, the timer is touched with the smartphone. Contact material AgSnO2, max. Switching current 120 A for 5 ms, pulse function 1 second to 59 minutes, shortest switching time 1 minute. Max. switching power at 230 V AC1: 4000 VA. Lamp loads: incandescent and halogen lamps 2000 W, energy saving lamps 400 W, LED (230 V AC) 400 W, NV halogen lamps or LED with EVG 400 W, NV halogen lamps or LED with KVG 800 W, fluorescent lamps with EVG 1000 W, fluorescent lamps with KVG 750 W, safe separation between voltage supply and contact.