Finder

Coupling relays with SSR relays for DIN rails with screw connections 1 closer for 6 A / 24 W DC, coil voltage 24 W DC, LED and EMV interference are integrated in the socket.

Monofunction time relay for DIN rail, 22.5 mm wide, 1 changer for 16 A/250 W AC, contact material Agni, function: response delay, 8 time ranges: 0.05 s - 10 days, supply voltage: 24-240 W AC/DC (50/60 Hz)

Masterbasic narrow coupling relays for DIN rails, with push-in terminals, modular design, SSR contacts 1 closer for 6 A 24 W DC, universally usable as coupling relays in the input to the SPS or in the output of the SPS for controlling actuators, LED display, terminals A1 or A2 and 13+ are bridgeable, coil voltage 24 W DC.

Masterplus narrow coupling relays for DIN rails, with screw connections, modular design, SSR contacts 1 closer for 6 A 24 W DC, universally usable as coupling relays in the input to the PLC or in the output of the PLC for controlling actuators, LED display, terminals A1 or A2 and 13+ are bridgeable, output securing module type 093.63 for 5 x 20 mm

Electronic power surge relay for under-put can mounting, 1 lock for 10 A /250 W AC (AC1,) max. Switching power at 230 W AC: AC1 2300 VA, AC15 450 VA, lamp loads: 1000 W incandescent and halogen lamps, energy saving lamps 300 W, LED (230 W AC) 300 W, NV halogen lamps or LED with EEC 300 W, NV halogen lamps or LED with KWG 500 W, fluorescent lamps with EEC 500 W, fluorescent lamps with KWG 350 W, contact material. Connection voltage: 230 W AC

Wrist-Treppenhaus-Lichtautomat mit Push-In-Klemmen, fÃ1⁄4r DIN-Schiene, 17,5 mm wide, Connections N and 3 are double present, 1 closer for 10 A/250 W AC, Contact material Agsno2, 3 functions: stairway light function, continuous light function, stairway light function with pre-warning and service function, switches in voltage zero flow

Staircase Light Machine, for DIN rails, 17.5 mm wide, all connections can also be made below, 1 closer for 16 A/250 W AC, contact material Agsno2, 3 functions: time range 0.5 to 20 min, continuous light circuit and service function (with actuation of the probe for more than 5 seconds, the output contact closes for 60 minutes. Switches in voltage zero crossing, suitable for L and N circuits, lamp loads: 3000 W incandescent and halogen lamps, energy saving lamps 600 W, LED (230 W AC) 600 W, NV halogen lamps or LED with EEC 600 W, NV halogen lamps or LED with KWG 1500 W, fluorescent lamps with EEC 1500 W, fluorescent lamps with KWG 1000 AC, connection voltage.

Insulation switch for external mounting, IP 54, 1 closer for 16 A, max. Switching power at 230 W AC: AC1 3700 VA, AC15 750 VA, Lamp load: incandescent and halogen lamps 2000 W, energy saving lamps 400 W, LED (230 W AC) 400 W, NV halogen lamps or LED with EEC 400 W, NV halogen lamps or LED with KWG 800 W, fluorescent lamps with EEC 1000 W, fluorescent lamps with KWG 750 W, with LED. Switch-on current: 120 A - for 5 ms, including adapter for post mounting, switch-on threshold: 1 to 80 Lux, operating voltage 230 W AC

Dimmer for chassis or can mounting, dimmes step-by-step, 2 modes of operation can be selected via pushbutton: (dimmer and memory function). usable for light bulbs and halogen lamps, Max. Power output circuit: 400 W, thermal overload protection installed, lamp loads: 400 W incandescent and halogen lamps, 400 W NV halogen lamps over EEC 400 W, switch-on time(ED): 100 %, minimum power: 10 W, connection voltage: 230 W AC.

SSR relays in 17.5 mm housing, input voltage 90 to 265 W AC, 1 closer for 5 A, switch-on current up to 300 A for 10 ms, switching load voltage range 48 to 265 W AC, zero pass switch, lamp loads: AC and halogen lamps 1000 W, energy saving lamps 800 W, LED (230 W AC) 800 W, NV halogen lamps or LEDs with EECHave.

3-phase network monitoring for series installation 400 W AC 50/60 Hz, for DIN rails, 1 changer for 6 A (AC1,) contact material Agcdo, contact voltage 250 W AC, max. Contact voltage 400 W AC, Contact material: Agcdo, Automated design: 17.5 mm wide, Phase succession and phase failure monitoring also for back voltage, Supply voltage Working range 170 - 500 W, LED status display

Multifunction time relay for DIN rail, 17.5 mm wide, 1 changer for 16 A / 250 W AC, contact material: Agni. Functions: AI: response delay, DI: turn-on wiper, SW: pulse relay (blinker) pulse start, BE: reverse delay, CE: response/relapse delay, DE: pulse shaper (switch-on wiper), time range: 0.1 s - 24 h supply voltage: 12-240 W DC/AC (50/60 Hz,)