ABB

For controlling a maximum of eight independent 230 W AC drives for positioning blinds, roller shutters, awnings and other hangings, as well as for controlling doors, windows and ventilation flaps. With manual operation directly on the device. No auxiliary voltage required. The outputs are interlocked electromechanically. Functions: On/off, lamella adjustment/stop, position and scene control, safety functions, sun protection and heating/cooling automatic, status messages.

Switches independent electrical consumers via potential-free contacts 12 ABB i-bus®. The manual operation of the contact is possible for each output. The switching state of the contact is displayed. The 16A-AC1 series is suitable for switching ohmic, inductive and capacitive loads.

To drive DALI participants via ABB i-bus®. A DALI output for max. 64 DALI participants. The DALI power supply is integrated. The activation can take place per DALI subscriber (64), via groups (16), together in the broadcast or via scenes (16). Extensive error and interference messages are available. DALI emergency light converter(64) according to EN 62386-202 are supported. The function test and continuous tests can be triggered via KNX via the emergency light converter and the result can be made available on the KNX. Slave, staircase light, locking and forced guidance function are integrated. The DALI telegram rate is variable. A separate diagnostic and commissioning tool is provided for individual re-addressing of the DALI participants or group assignment, ABB i-bus tool available.

forms the interface between KNX installations and IP networks and works according to the KNXnet/IP specification (tunneling and routing). The IPR/S can be used as a fast line or range coupler (routing). The complete filter table for all main groups (0-31) can be loaded. With the ETS, KNX devices can be programmed via LAN. 5 tunneling servers are available for this and for other clients. The IP address of the IPR/S can be set or received by a DHCP server. The power supply is over 12..30 W DC or alternating via Power-over-Ethernet (Poe) to IEEE 802.3af Class 1. Alternatiw to KNX Standard Communication (Multicast) can communicate up to 10 IPR/S 3.1.1 via Unicast.

For controlling a maximum of eight independent 230 W AC drives for positioning blinds, roller shutters, awnings and other hangings, as well as for controlling doors, windows and ventilation flaps. With automatic driving time determination and manual operation directly on the device. No auxiliary voltage required. The outputs are interlocked electromechanically. Functions: On/off, lamella adjustment/stop, position and scene control, safety functions, sun protection and heating/cooling automatic, status messages.

To drive DALI participants via ABB i-bus®. Two DALI output for max. 2x64 DALI participants. The DALI power supply is integrated. The activation takes place per DALI subscriber (2x64), about groups (2x16), together in the broadcast or through scenes (2x16). Extensive error and interference messages are available. DALI emergency light converter (2x64) are supported in accordance with EN 62386-202. The function test and continuous tests can be triggered via KNX via the emergency light converter and the result can be made available on the KNX. Slave, staircase light, locking and forced guidance function are integrated. The DALI telegram rate is variable. A separate diagnostic and commissioning tool, i-bus tool is available for individual re-addressing of the DALI participants or group assignment.

Fault current protection devices (Rccbs) offer personal and property protection as well as protection against electrically ignited fires according to DIN WDE 0100-410 and DIN WDE 0100-530. The F200 series fault current protection switches ensure protection against sinusoidal alternating currents, pulsating currents and smooth direct fault currents. As well as fault protection (protection in indirect contact), additional protection (with I?n = 30 ma) and fire protection (with I?n = 300 ma). They meet product standards for type A IEC/EN 61008-1, 61008-2-1, 61543 (WDE 0664 10, 11, 30) and type B DIN EN 62423 (WDE 0664-40). Areas of application are predominantly in industrial and commercial applications. The extensive range of accessories offers you everything you need for your installation tasks. The RCCB type B is suitable for non-linear circuits that can generate fault currents with smooth direct fault currents and with different (high/) frequencies. These components are located in electronic operating means such as frequency converters. The RCCB type B has a frequency range of 0...2 khz to detect the fault current and offer a high system availability.

Fault current protection devices (Rccbs) offer personal and property protection as well as protection against electrically ignited fires according to DIN WDE 0100-410 and DIN WDE 0100-530. The F200 series fault current protection switches ensure protection against sinusoidal alternating currents, pulsating currents and smooth direct fault currents. As well as fault protection (protection in indirect contact), additional protection (with I?n = 30 ma) and fire protection (with I?n = 300 ma). They meet product standards for type A IEC/EN 61008-1, 61008-2-1, 61543 (WDE 0664 10, 11, 30) and type B DIN EN 62423 (WDE 0664-40). Areas of application are predominantly in industrial and commercial applications. The extensive range of accessories offers you everything you need for your installation tasks. The RCCB type B is suitable for non-linear circuits that can generate fault currents with smooth direct fault currents and with different (high/) frequencies. These components are located in electronic operating means such as frequency converters. The RCCB type B has a frequency range of 0...2 khz to detect the fault current and offer a high system availability.

Switches independent electrical consumers via potential-free contacts 12 ABB i-bus®. The manual operation of the contact is possible for each output. The switching state of the contact is displayed. The 16/20AX, 16A-AC3, C-Last series is particularly suitable for switching loads with high turn-on current peaks such as illuminants with compensation capacitors or fluorescent lamp loads (AX) according to DIN EN 60669.

The weather center WZ/S collects and processes weather data from the weather sensor. The weather sensor provides the data for dusk, brightness in three directions, rain, temperatures, information about day/night, wind speeds, date and time. There are 4 value stores available, 24 values can be stored per value store. The weather center is matched to the weather sensor WES/A. The integrated power supply supplies the weather sensor directly with voltage. The device can optionally be operated with an operating voltage of 115 to 230 W AC, 50/60 Hz.