OBO

Hammer head screw for profile rail MS 41, with toothing, fixation by 90° rotation.

Connection options: - 7 x single- or multi-wired lines up to 25 mm2 or fine-wired lines up to 16 mm2 - 1 x round conductor Rd 8-10 - 1 x flat band up to FL30 or round conductor Rd 8-10 - base plate and cover made of polystyrene - UV-resistant - screws and overlay made of VA - flash current-bearing capacity 50 kA (10/350) Colour: black Weight: 23 kg/100

Hole band in corrugated form, in practical unrolling box.

The cable branch boxes consist of a thermoplastic polypropylene with plug-in seals made of ethylene vinyl acetate EVA. Lines can be installed directly through the 9 x M25 7 x M32 seals, or the seals were cut in with a knife at the intended locations to produce an insertion opening for pipes or pipes. Alternatively, cable screw connections can be plugged through the openings instead of the seals and can be constricted from the inside with a counter nut. The cable branch boxes can be equipped with sheet metal screws 3,5x9,5 in openings on the floor mounted on mounting plates. Lights internal dimensions: 225x173x86 Cover with labeling field and sealable.

The V50 lightning current combination conductor made of halogen-free plastic is suitable for lightning protection potential compensation according to VDE 0185-305 (IEC 62305). A dynamic separation device and optical status display characterize the modularly pluggable arresters. The CombiController is particularly suitable for lightning protection potential compensation for buildings of the flash protection class III and IV. The flash current-abableite power is 12.5 kA (10/350) per pole and up to 50 kA (10/350) total. The vibration-proof latching and the voltage and type coding ensure safety and avoid confusion between upper and lower parts. The wedge-shaped design of the contacts allows simple insertion and even simpler removal of the upper parts. Additional technical product information can be obtained quickly and easily via the QR code applied to the power shield.

The Ratelle cable channel system Magic (RKSM) is the world's first completely screwless channel system. The RKSM has a beaded longitudinal bottom hole 7 x 20 mm for boom mounting. From width 200 mm, a cross-sicking improves 7 x 32 mm cable ventilation and facilitates assembly. The center hole 11 mm allows direct threaded rod suspension and a continuous side hole 7 x 20 mm serves as a connector hole. All system components and channel types are equipped with the innovative Magic connector, from the channel to the molding. The combination of both advantages makes assembly easier and more time-saving. The continuous potential compensation is guaranteed without additional components. The Magic longitudinal connector set (to order separately) allows the combination of the Magic cable channels with conventional OBO cable channels of the same width. The magnetic shield attenuation is 20 dB without lid and 50 dB with lid. Tested and approved in functional maintenance systems of classes E30 to E90 according to DIN 4102 part 12. Remove assembly variants and approval data from usability certificates.

Light wall and handle with welded head plate for fastening to U-bars, constructions and walls.

Connection clamp system ST, BP, OMEX and LightEarth, on round conductor Rd 8-10, incl. connector 5001/DIN.

The T-series cable branch boxes are all UV-resistant. They consist of a thermoplastic polypropylene with plug-in seals made of ethylene vinyl acetate EVA. This plastic is soft, that is, it can move. Thus, lines can either be installed directly through the 4 x M25 seals or the seals can be cut in with a knife at intended points in order to produce an insertion opening for lines or for pipes. In addition, cable screw connections can be inserted through the openings instead of the seals and can be constricted from the inside with a mating nut. The cable branch boxes can be screwed onto both an M6 thread and with sheet metal screws 3,5 x 9,5 in openings on the floor mounted on mounting plates. Lights internal dimensions: Ø63x45 mm cover with label field.

potential compensation rail according to VDE 0618, part 1 suitable for potential compensation according to DIN VDE 0100-410/-540 and flash protection potential compensation according to DIN VDE 0185-305. The clamping rail 10 x 10 mm consists of nickel-plated brass, the contact-proof terminal blocks made of galvanically galvanized steel, the cover hood and the rail blocks made of gray polystyrene. The cover hood is plombable / inscribable. The potential compensating rail is capable of energizing up to 100 kA (10/350) and has a tie bar with screw securing against self-lockers (e.g. required in industry and ex areas). Connection options: 7 single- or multi-wire lines 2.5-25 mm2 or fine-wire lines up to 16 mm2 (max. Ø 7 mm), 2 single or multi-wire lines 25-95 mm2 or fine-wire lines up to 70 mm2 (max. Ø 13.5 mm) and 1 flat conductor 30 x 35 mm.

Universal clamping block for fastening and connecting circular conductors to constructions - Incl. Hexagonal screw M8 x 25Fitting: Rd 8-10 Material: Steel Weight: 3.4 kg/100 St Type: 324 S-FT Art. No.: 5326303

100 pieces 8X42 multi-purpose plugs 8x42mm, PA, grey-white, 9002 2347547Also suitable as cavity dowels, with collar against slipping. 3 applied fins take up the torque. Required minimum screw length = dowel length + component thickness + 1 x screw Ø. Extraction value applies to wood screws with the largest screw diameter in the concrete of class B25. Our security rating recommendation: 5-fold