Sale

grounding and lightning protection terminal VA M8, clamping region Rd 8-10 mm, connection single/multi-wire 4 - 50 mm2LxBxH: 37 x 32 x 66 mm.

RAPID 16 THE NEW KLEMMENFAMILIE The Schletter module terminal family Rapid16 offers many advantages, such as e.g. better storage by minimal variants and the grounding pin in each module clamp. Rapid16 is designed for all Schletter module support profiles with 8 mm click groove and for module frame heights of 30 - 50 mm. • Minimum variants for all applications • Integrated grounding pin • Optimum storage and fast installation • General structural approval Z14.4-631 • 10 years warranty The clamping area is divided into 2 sizes. The low module terminals can clamp modules with a frame height of 30-40 mm. The higher ones are suitable for frame heights of 40-50 mm. In all center terminals and in the case of the high end terminals, the claws can be rotated and are therefore suitable for vertical and horizontal (linear) module clamping. Exceptions are the end terminals for low module frames. For geometric reasons, rotation is not possible here. Therefore, there is the low end clamp also in the variant “H”. All clamps are also available in black anodized to match these optically to black module frames.

4x screened, meter print on the cable, perfectly protected against heat, cold and rain

Screen size: 120 dB
Shield: 4-fold
Outer diameter: 7.2 mm
External conductor diameter: 6.0 mm
Insulation diameter: 4.8 mm
Internal conductor diameter: 1.1 mm CCS
Aluminium foil: 2x laminated
Brake: 2x 64 x 0,12 al
Impedance: 75 Ω
Fire protection class: Eca
Hazardous substances: no
TÜV tested
ISO 9001
RoHS-conform
Meter imprint on the cable
Cable length: 100 m / 500 m

Attenuation at 20° C. to 100 m

at 800 MHz: 17 dB
at 2150 MHz: 29 dB

Backflow damping

800 MHz: > 26 dB
for 2150 MHz: > 23 dB

Logistic data
100 meter coil:

Length: 275 mm
Width: 275 mm
Height: 110 mm
Weight: 4 kg

Hauptleitungs-Abzweigklemme 25 mm², nach DIN 0603-2 mit Schnappbefestigung. Allseitig fingersicher. Für senkrechte und waagerechte Anbringung auf Tragschiene 35 mm nach DIN EN 60715 Anschlussmöglichkeiten : 4 Klemmstellen 2,5 mm² bis 25 mm² je Pol Polzahl : 5 Abmessung HxBxL : 37 x 50,5 x 100 mm Werkstoff Isolierteil : Polyamid Werkstoff Kontakt : Messing Werkstoff Klemmschrauben : galvanisch verzinkter Stahl Nennspannung : 400 V Farbton: lichtgrau Kleinhuis Modell-Nr. : HLAC2552 EP Material___________ EP Lohn__________ Einheitspreis/Stueck

Roof hook RAPID 2+ PRO, VA quality, welded, leg height 45 mm, web arrangement symmetrical, pre-assembled, compatible with standard and ProLine series with a rotatable multi adapter

Wall and ceiling channel with bottom hole consisting of lower part and upper part for mounting directly on the wall.

Circuit breaker 1polig 6kA C-Characteristic 16A 1 module circuit breaker according to DIN VDE 0641 part 11/8.92 , contact protection IP2x according to DIN VDE 0106 part 100 with VDE characters. LS with time-delayed thermal exhaust for overload protection and electromagnetic exhaust for short-circuit protection. Suitable for retrofit installation of additional equipment. Possibility of marking directly on the device and individual removal from the phase rail composite by unlocking the quick attachment of the hat rails. Rated current: 16 ATrigger characteristic: CNominal shutdown capacity: 6 kANumber of poles: 1 PNumber of modules: 1AC voltage: 230/400 VInsulation voltage: 500 VFrequency: 50/60 HzConnection type: screw technologyTorque: 2,8NmTotal loss power at rated current: 2,3 WDevice life, electrical switching games: 4000Machine life mechanical switching games: 20000Operating temperature: -25 to 60 °CStorage temperature: -25 to 80 °CHeight installed product: 83 mmWide installed product: 17.5 mmDeep installed product: 70 mm

50 pieces of COMPACT connection terminal for all conductor types; 3-wire terminal; with actuating levers; max. Ambient temperature 85°C



Total number of clamping points
3



Total number of potentials
1



Colour
transparent



Measurement data according to 1
BY 60664



Pollution (1)
2



Measurement voltage EN (1) [V]
450
V


Measurement surge voltage (1) [kV]
4
KV


Rated current (1) [A]
32
A


Connection technology 1
CAGE CLAMP®



Nominal cross-section 1
4 mm2



one-row, connectable 1
0.2 ... 4 mm2 / 24 ... 12 AWG



multi-wire, connectable 1
0.2 ... 4 mm2 / 24 ... 12 AWG



elegant, connectable 1
0.14 ... 4 mm2 / 24 ... 12 AWG



Stripping length 1
11 mm / 0.43 in



Stripping length of (1) [mm]
11
mm


Stripping length to (1) [mm]
11
mm


Type of wiring
Side wiring



Flammability class according to UL 94
V2



Weight [g]
2527
g


Width
18.7 mm / 0.736 in



Height
8.3 mm / 0.327 in



Depth
18.6 mm / 0.732 in



Safety note 1
in earthed nets

Device connection box for attachment to reinforcement.
1-part with injection-molded front part
with 4 screw domes and 2 spreader claw fields per opening side
fully insulated line transition in combination
Standard combination distance 71 mm




Width 290 mm


depth 95 mm


Installation opening Ø 60 mm


for concrete covers 20-60 mm

Starres electric installation tube for light mechanical stress, light gray similar to RAL 7035, one-sided sleeved, smooth, made of PVC hard. Tested according to ÖVE/ÖNORM EN 61386-21, classification EN 2221 1, peak pressure resistance > 320N, temperature range -5° to +60°C, delivery length 3m rods, use: universal insulating and mounting tube for installation on and under plaster

Leitungsschutzschalter 230V 6kA, 1+N-polig, B, 13A